Nearly all of the time, companies would spend lots of money to purchase their lift trucks. It is essential, therefore to take proper care of your machinery to protect your investment into the long run. It is really a good idea to know the procedures that are carried out during maintaining and taking care of this machine.
One of the best ways to tell how good the engine is running is by starting the forklift up and listening closely to see how it works. For instance, if there are any knocks or misses, the equipment is faulty and this must raise several issues. In addition listen carefully for any squealing noise which come from the belts as these noises would provide you with a wealth of information.
Some of the main components needing attention during maintenance comprise the gauges, horn, safety warning devices, the lights and the overhead guard. Any burnt out light bulbs or faulty parts should be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals should be cleaned after the above components have been checked carefully. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery has to be inspected in order to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and after that change the filters. The fuel filters, hydraulic filter and the transmission filter have to be regularly replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change has been completed and new filters have been fitted, visually inspect the drive axle from beneath the machinery. Be certain to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the problem accordingly. Then, inspect every other part of the machine like the wheels. If any type of fault or concern is detected, be certain to deal with it immediately so as to make certain the machinery is working at its safest and optimum levels.