Forklifts are vehicles usually found within factories, warehouses and various work locations where it is necessary to move heavy materials from one location to another. The mast is the mechanism situated on the front of the forklift which hydraulically raises and lowers the load. The "cat" is the protected area where the operator of the forklift sits.
Forklifts could carry loads that weigh between one to five tons. Various kinds could be utilized to carry shipping containers and much heavier loads.
Forklift tires must be maintained and checked on a regular basis. The types of tires on various forklifts vary according to factors like for instance frequency of use, load weights and ground surfaces. Every operator of a forklift must have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
You should frequently check the tires. Watch for signs of damage and wear to the tires. If the wear on the tire exceeds 40 percent, it must be replaced.
When you purchase tires, be sure you buy the right kind - polyurethane, solid or pneumatic.
When the tire needs replacing, position the forklift jack under the tire and raise the forklift high enough that you can change the tires easily.
To remove the damaged tire, pull the tire from the rim using the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you have just one jack, lower the forklift, then reposition the jack at the next tire.
A repair company could provide on-site tire repair. If the tire is extremely large for both in-house and mobile tire presses, the damaged tire will have to be transported to a shop which has a stationary tire press.